Description
6kW SRNE Hybrid Solar System with a 10kWh Battery
System Overview
This 6kW SRNE Hybrid Solar System is designed to provide reliable solar power for residential and small commercial applications. The system combines 8 × 635W Jinko bifacial monocrystalline solar panels, a 6kW 48V SRNE low-frequency hybrid inverter, and a 10kWh 51.2V 200Ah SRNE lithium battery bank.
The low-frequency inverter is particularly suitable for applications with inductive loads and motor-driven appliances, while the lithium battery provides substantial energy storage for use when solar power is unavailable.
1. Solar Panels – 8 × 635W Jinko Bifacial
Specifications:
- Quantity: 8 panels
- Panel rating: 635W each
- Total solar capacity: 5,080W / 5.08kWp
- Technology: Bifacial Monocrystalline
- Cell technology: N-Type TOPCon
- Transfer/conversion efficiency : 24%
- Warranty stated: 25 years
- Bifacial design allows the panels to capture additional reflected light from the rear side.
The 8 panels provide approximately 5.08kWp of installed solar generation capacity, supplying energy to the loads while also charging the battery during periods of adequate sunlight.
2. SRNE 6kW 48V Low-Frequency Hybrid Inverter
Specifications:
- Brand: SRNE
- Rated power: 6,000W / 6kW
- System voltage: 48V
- Type: Hybrid solar inverter
- Frequency: 50/60Hz
- Technology: Low-frequency
- MPPT: Dual MPPT
- Communication: Wi-Fi compatibility
- Waveform: Pure sine wave
- Motor/load capability: up to 4HP
- Typical transfer time stated: 10ms
The low-frequency design makes the inverter suitable for equipment with high starting currents, including pumps, refrigerators, compressors, washing machines and other inductive loads. The dual-MPPT configuration also allows greater flexibility when designing the solar-panel array.
3. SRNE 10.24kWh 51.2V 200Ah Lithium Battery
The battery specification has been upgraded from the 5kWh battery shown in the original quotation to a 10kWh 51.2V 200Ah SRNE lithium battery.
Specifications:
- Brand: SRNE
- Battery type: Lithium Iron Phosphate (LiFePO₄)
- Nominal voltage: 51.2V
- Capacity: 200Ah
- Nominal energy: 10.24kWh
- System description: 10kWh battery
- Suitable for solar energy storage and backup power
- Designed for repeated charge/discharge cycles
The larger battery provides significantly more energy storage than the original 5kWh battery, allowing the system to store more daytime solar energy for use during the evening, night, power interruptions, or periods of low solar production.
Note: A 51.2V × 200Ah battery has a nominal energy capacity of approximately 10.24kWh, commonly marketed as a 10kWh battery.
4. Solar PV Cables
- 6mm² solar PV cable
- Quantity in quotation: 80 metres
- Designed for connecting the solar panels to the solar system and carrying DC power from the PV array.
5. Battery Cables
- 35mm² battery cable
- Quantity in quotation: 8 metres
- Used for the high-current connection between the battery and inverter.
6. Automatic Changeover Switch
Specifications:
- Double pole
- Single phase
- 63A
- Automatically changes between available power sources.
This provides convenient switching between the solar/inverter supply and the alternative mains/grid supply.
7. Digital Automatic Voltage Regulator
The system includes a digital automatic voltage regulator (AVR) to help regulate incoming voltage and provide additional protection for connected electrical equipment against voltage fluctuations.
8. Aluminium Mounting Rails
- Aluminium construction
- Non-corrosive
- Long mounting rails
- Used to securely mount the solar panels on the roof or mounting structure.
9. DC Protection
The system includes a 125A DC double-pole breaker, providing isolation and protection on the DC side of the installation.
10. 12-Way Combiner Box
A 12-way combiner box is included for organizing and combining the solar PV connections while providing a structured point for DC-side protection and isolation.
11. AC Cable & Installation Accessories
The quotation also includes:
- 6.0mm² AC twin with earth cable – 25m
- 4×4 trunking
- 25mm flexible conduit – 100m
- Cable tapes
- Cable ties
- Cable lugs
These materials are used for safe routing, protection, termination and installation of the system wiring.
Key System Capacity
| Component | Specification |
|---|---|
| Solar panels | 8 × 635W |
| Total PV capacity | 5.08kWp |
| Hybrid inverter | SRNE 6kW, 48V Low Frequency Hybrid inverter |
| Battery | SRNE 51.2V 200Ah LiFePO₄ |
| Battery nominal capacity | 10.24kWh (~10kWh) |
| Inverter MPPT | Dual MPPT |
| Inverter waveform | Pure sine wave |
| Changeover | 63A Double Pole |
| Solar cable | 6mm² |
| Battery cable | 35mm² |
| DC breaker | 125A Double Pole |
Main Advantages
- 5.08kWp solar generation capacity
- 10.24kWh lithium energy storage
- 6kW low-frequency inverter suitable for demanding loads
- Suitable for inductive and motor-driven appliances
- Dual MPPT for flexible solar-array configuration
- Pure sine wave output suitable for sensitive electronic equipment
- Wi-Fi compatibility for monitoring, as stated in the quotation
- Lithium battery offers a compact and efficient energy-storage solution
- Automatic changeover for convenient backup operation
- Includes essential solar protection, cabling and mounting accessories
- 10-year warranty for complete solar systems and free installation countrywide, with transport to site outside Nairobi payable by the customer.
📞📞TALK TO US:0799316769
🚚🚚Deliveries Done Countrywide at a reasonable cost!!
🎁🎁24 Months Warranty🎁🎁
🔶🔸Order Yours Now🔸🔶
Reviews
There are no reviews yet.